特價

🇩🇰丹麥 MORCH DP-6 Gold Precision 軸承唱臂

NT$75,000

Moerch DP-6 唱臂

DP-6型具有獨特的軸承組合。矽酮阻尼的高精度滾珠軸承組件用於水平運動平面。垂直運動採用了兩個精密的藍寶石軸承,如果需要,也可以通過將矽油注入井中進行垂直阻尼來進行阻尼。水平運動平面的阻尼與垂直運動模式的阻尼無關,後者可以進一步調整為所有中間阻尼水平。

在DP-6 軸承的設計中,一個藍寶石軸承的樞軸上完成了用於完美通道分離的方位角調整。

與所有Moerch音臂一樣,DP-6音臂具有可互換的臂管。

已售完

貨號: morch-dp6 分類:

描述

在英國本土,此唱臂售價高達 £2,379.00。越點現貨只買 NT $ 75000

Construction: Radial arm with interchangeable arm tubes.
Bearing principle: DP-6 and DP-8: Dual bearing
UP-4: Unipivot.
Effective mass of complete tonearm with arm tube:
Light (green):
Medium (red):
Extra heavy (blue):
All arm tubes can be used with all models.
4 g
7.5 g
14 g
Fundamental resonance (depending on arm tube): 8 – 16 Hz (for DP-8 N/A for the horizontal mode of motion)
Tracking force (when using calibrated scale): 0 – 3 g
Bias compensation: Watch spring with string – adjustable while playing.
Azimuth: Azimuth is adjustable for correct channel separation.
Cueing mechanism: Piston in U-pipe, damped with silicone fluid.
Distance between pivot and center of turnable platter: 212 mm (8 5/16″) or 294.1 mm (11 9/16″)
Diameter of hole for mounting arm base: 20 mm (13/16″)
Rear overhang from pivot: 70 mm (2 3/4″)
Weight of DP-8 arm base w/sideweights w/o counterweights and cord: 580 g
Weight of DP-6 arm base w/armbush w/o weights and cord: 280 g
Weight of UP-4 arm base w/armbush w/o weights and cord: 240 g
Weight of a set of counterweights: 120 g
Effective length: 230 mm (9 1/16″)
Offset angle: 24 degrees.
Lateral tracking error: 0 degrees at 66 mm and 120.9 mm from center of record.
Pivot point: Pivot point is in level with the record surface.
Bearing Friction: Bearing friction less than 0.04 mN in all directions.
Balancing: Four (4) different balancing weights.
Internal wiring: 19 strands of ultra pure silver insulated with Teflon.
Capacitance per channel: 28pF for all models.
Tonearm Cord: Balanced. Extremely purified copper strands that are heavily silver coated. Halogen free insulation.
Moerch tonearm connector with Cardas RCA connectors.
Capacitance per channel: 100pF.
Terminals: All terminals throughout the arm are gold plated.
Bearing concept of model DP-6 and DP-8: One internally damped, precision ball-bearing assembly for the horizontal plane of motion. Two pivoted sapphire bearings for the vertical mode of motion which can be damped also, if desired, and then adjusted to different levels of damping.
Bearing concept of model UP-4: Hardened steel pivot resting on a concave sapphire, and damped for all motions with silicone fluid.
DP-6 and DP-8 finish: 24 carat GOLD or CHROME.
UP-4 finish: CHROME or at special order GOLD.

商品評價

目前沒有評價。

搶先評價 “🇩🇰丹麥 MORCH DP-6 Gold Precision 軸承唱臂”

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *